-22%
ASTROLUX® EA01S 4*XHP50.2/ SST40 USB-C Andúril 26800 Flashlight Bundle
Original price was: $64.95.$52.46Current price is: $52.46.
ASTROLUX® FT03 XHP50.2/SST40 4300lm NarsilM v1.3 USB-C 26800 Flashlight Bundle
Original price was: $60.95.$47.56Current price is: $47.56.
Brightness: 4300 lumens (max.)
Features: Texas Avenger FET Driver NarsilM v1.3 with USB-C charging
Beam Distance: 735 m
Battery Type: 1* 26800 (included)
Description
Special Deal:
Coupon: BGFT268
Exclusive deal for 1theDeals.com. Sharing of our coupon code is strictly prohibited.
Specifications:
| Product name: | ASTROLUX FT03 LUMINUS SST40-W LED Flashlight | ASTROLUX FT03 CREE XHP50.2 LED Flashlight |
| Brand: | ASTROLUX | ASTROLUX |
| Model: | FT03 | FT03 |
| LED type: | LUMINUS SST40-W | CREE XHP50.2 |
| Color Temperature: | Cool White (CW): 6500K, Natural White (NW): 5700K / 5000K | Cool White (CW): 6000-6500K, Natural White (NW): 5700K |
| Battery Configurations: | 1x 26650/ 21700/ 18650 | 1x 26650/ 21700/ 18650 |
| Range: | 875 m | 735 Meters (Max.) |
| Peak Beam Intensity: | 19000 cd | 13300CD (Max.) |
| Lumens: | Max. 2400 lm | Max. 4300lm |
| Runtime: | – | – |
| Voltage Input: | 2.8V – 4.2V | 2.8V – 4.2V |
| Firmware: | Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace | Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace |
| Mode(s): | Default UI: Smooth rampingThis feature-rich UI provides for smooth ramping of the light output between 0 and 50%, with an easily- accessible 100% TURBO mode. Turn the FT03 ON: single-click the button, FT03 turns ON using the previously used light output level Ramp light level: press&hold button Reverse ramp: while ramping in one direction, release button briefly and press&hold again Instant TURBO: double-click Turn the Lamp OFF: single-click MOON mode: from OFF: press the button and release as soon as the FT03 turns on Strobes: double-click for TURBO, and then double-click again The strobes are deactivated by default. To enable strobes you must klick 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: triple-click (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: four clicks to disable the FT03, same to re-enable the Lamp MOMENTARY mode: five clicks (loosen and re- tighten the tail-cap to return to normal operation) Factory reset: triple-click (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. | Default UI: Smooth rampingThis feature-rich UI provides for smooth ramping of the light output between 0 and 50%, with an easily- accessible 100% TURBO mode. Turn the FT03 ON: single-click the button, FT03 turns ON using the previously used light output level Ramp light level: press&hold button Reverse ramp: while ramping in one direction, release button briefly and press&hold again Instant TURBO: double-click Turn the Lamp OFF: single-click MOON mode: from OFF: press the button and release as soon as the FT03 turns on Strobes: double-click for TURBO, and then double-click again The strobes are deactivated by default. To enable strobes you must klick 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: triple-click (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: four clicks to disable the FT03, same to re-enable the Lamp MOMENTARY mode: five clicks (loosen and re- tighten the tail-cap to return to normal operation) Factory reset: triple-click (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. |
Alternative UI: Mode-setsThe FT03 is factory-set to operate using the contemporary RAMPING user interface, as described in the previous section. However, the FT03 can also be operated using a more conventional MODE-SET style user interface. (See next section for detail on how to set UI options). Using the MODE-SET UI the output does not ramp, it steps from one mode to the next using single-clicks. Turn the FT03 ON: single-click Next mode: single-click before the current mode ‘locks in’ (1.2 s) Previous mode: press&hold Last mode [100%]: from OFF: press&hold Turn the Lamp OFF: single-click button, after resting on a mode more than 1.2 s (mode locked in) Strobes: press&hold The strobes are deactivated by default. To enable strobes you must klick 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: from OFF: single-click followed by press&hold (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: from OFF: double-click followed by press&hold, same to re- enable the FT03 Factory reset: from OFF, single-click followed by a press&hold (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. | Alternative UI: Mode-setsThe FT03 is factory-set to operate using the contemporary RAMPING user interface, as described in the previous section. However, the FT03 can also be operated using a more conventional MODE-SET style user interface. (See next section for detail on how to set UI options). Using the MODE-SET UI the output does not ramp, it steps from one mode to the next using single-clicks. Turn the FT03 ON: single-click Next mode: single-click before the current mode ‘locks in’ (1.2 s) Previous mode: press&hold Last mode [100%]: from OFF: press&hold Turn the Lamp OFF: single-click button, after resting on a mode more than 1.2 s (mode locked in) Strobes: press&hold The strobes are deactivated by default. To enable strobes you must klick 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: from OFF: single-click followed by press&hold (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: from OFF: double-click followed by press&hold, same to re- enable the FT03 Factory reset: from OFF, single-click followed by a press&hold (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. | |
Advanced operationRefer to manual | Advanced operationRefer to manual | |
| Switch Type: | Electronic (side) | Electronic (side) |
| Switch Location: | Side of the flashlight with LED indicator | Side of the flashlight with LED indicator |
| Tail Stand: | Yes | Yes |
| Material: | Aluminum alloy with Type III hard-coat anodizing | Aluminum alloy with Type III hard-coat anodizing |
| Impact Resistant: | 1.5 Meter | 1.5 Meter |
| Waterproof: | Equivalent to IPX7, do not immerse in liquids | Equivalent to IPX7, do not immerse in liquids |
| Lens: | Glass with anti-reflective coating | Glass with anti-reflective coating |
| High quality smooth reflector | High quality smooth reflector | |
| Color: | Black / Blue / Green | Black / Blue / Green |
| Weight: | 295g without battery | 295g without battery |
| Size: | 69.5mm x 34.5mm x 170mm (Head diameter x Body diameter x Length) | 69.5mm x 34.5mm x 170mm (Head diameter x Body diameter x Length) |
| Package Included: | 1 x Astrolux FT03 2 x Spare Waterproof O-rings 1 x Lanyard 1 x User Manual | 1 x Astrolux FT03 2 x Spare Waterproof O-rings 1 x Lanyard 1 x User Manual |
Additional information
| Brand | |
|---|---|
| Emitter brand |
CREE ,Luminus |
| Sponsors & Partners |
Banggood |
| Material |
Aluminium |
| Color |
Black |