WUBEN A1 4*SBT90 20000lm 2000m Easy Carry Spotlight Flashlight

ON/OFF: Single click on the © switch to turn on the flashlight, single click again to turn off. The flashlight has memory function, will memorize default output selections, but not flash modes or Turbo.

Default Output Selections: When the flashlight is on, single click on the@ switch to cycle through Level 1- Level 2 – Level3 – Level 4 -Level 5 – Level 1.

Instant Turbo: When the flashlight is on, long press the @switch to activate Turbo mode, single click to back to the previous output level. When the flashlight is off, press and hold thee switch to activate the Turbo mode, release to turn it off.

Flash Modes: When the flashlight is on or off, click the @switch and hold for 1 second to activate Strobe. Single click the e switch to swap between SOS and Strobe. Single click the C)switch to the previous output level.

Lock/Unlock: When the flashlight is off, 4 times click any switch, the main light will blink 3 times to indicate the locking of the flashlight. 4 times click on any switch again will activate Eco mode to indicate the unlocking of the flashlight.

Breathing Light: At any mode, triple click the e switch to turn on/off the blue breathing light. The breathing light has power-off memory function.

The (power) switch and (w) switch are exactly the same as the switches on the flashlight. Remote control range is 10 meters.

Charge the built-in battery of controller with 5V/1A device. Red light is charging, green light is charging finished.

When it needs to be charged, the battery indicator will be red. Otherwise, it will be green.

After shutting down without any operation for half an hour, the remote controller enters dormancy, double-click any switch on the controller, the flashlight lights up to indicate that the remote controller is activated and works normally again.

The factory default remote control is paired. If you find that the remote control is not available, please press and hold the ® switch and @switch on the flashlight at the same time for 5 seconds. When the red and blue lights on the ©switch flash alternately, press the © switch of the remote control switch within 30 seconds. It can be paired, otherwise the pairing is unsuccessful.