Wurkkos TS10 3*CSP CRI90 AUX 14500 EDC Flashlight – Titanium

Mode H1:（1lm）Beam distance：4.5 meters Intensity (cd)：5
Mode H2:（10lm）Beam distance：12 meters Intensity (cd)：45
Mode H3:（50lm）Runtime：6h43min Beam distance：25 meters Intensity (cd)：160
Mode H4:（130lm）Runtime：2h43min Beam distance：40 meters Intensity (cd)：400
Mode H5:（300lm）Runtime：1h24min Beam distance：55 meters Intensity (cd)：800
Mode H6:（580lm）Runtime：1h20min Beam distance：80 meters Intensity (cd)：1675
Mode H7:（900lm）Runtime：1h10min Beam distance：100 meters Intensity (cd)：2525
Mode H8:（1400lm）Runtime：1h Beam distance：130 meters Intensity (cd)：4150

Quick Start
After putting a battery in the light and tightening the parts together, the light should quickly blink once to confirm it has power and is now operational. After that, basic usage is simple:
Click to turn the light on or another click to turn it off.
– Hold the button to change brightness.
– Release and hold again to change brightness the other way.

That is all the user needs to know for basic use, but there are many more modes and features available for people who want more.

Before reading the rest of this manual, it is recommended that users look at the Anduril UI diagram(s), which should be provided along with the flashlight.
Button presses
Button presses are abbreviated using a simple notation:
– 1C: One click. Press and then quickly release the button.
– 1H: Hold. Press the button, but keep holding it.
– 2C: Two clicks. Press and release quickly, twice.
– 2H: Click, hold. Click two times, but hold the second press.
– 3C: Three clicks. Press and release quickly, three times.
– 3H: Click, click, hold. Click three times, but hold the final press.
The same pattern is used with higher numbers too. For example, 10C means ten clicks… and 10H means ten clicks but hold the final press.
Simple UI Diagram Not everything is covered in the diagram, please read the text.