Special Deal:
Price ($):
39.99
Coupon:
BG03SFT40
Exclusive deal for 1theDeals.com. Sharing of our coupon code is strictly prohibited.
Specifications:
| Product name: | ASTROLUX FT03 LUMINUS SFT40 LED Flashlight |
| Brand: | ASTROLUX |
| Model: | FT03 |
| LED type: | LUMINUS SFT40 |
| Color Temperature: | Cool White (CW): 6500K |
| Battery Configurations: | 1x 26650/ 21700/ 18650 |
| Range: | 1300 m |
| Peak Beam Intensity: | 400000 cd |
| Lumens: | Max. 2200 lm |
| Runtime: | – |
| Voltage Input: | 2.8V – 4.2V |
| Firmware: | Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace |
| Mode(s): | Default UI: Smooth rampingThis feature-rich UI provides for smooth ramping of the light output between 0 and 50%, with an easily- accessible 100% TURBO mode. Turn the FT03 ON: single-click the button, FT03 turns ON using the previously used light output level Ramp light level: press&hold button Reverse ramp: while ramping in one direction, release button briefly and press&hold again Instant TURBO: double-click Turn the Lamp OFF: single-click MOON mode: from OFF: press the button and release as soon as the FT03 turns on Strobes: double-click for TURBO, and then double-click again The strobes are deactivated by default. To enable strobes you must klick 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: triple-click (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: four clicks to disable the FT03, same to re-enable the Lamp MOMENTARY mode: five clicks (loosen and re- tighten the tail-cap to return to normal operation) Factory reset: triple-click (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. |
Alternative UI: Mode-setsThe FT03 is factory-set to operate using the contemporary RAMPING user interface, as described in the previous section. However, the FT03 can also be operated using a more conventional MODE-SET style user interface. (See next section for detail on how to set UI options). Using the MODE-SET UI the output does not ramp, it steps from one mode to the next using single-clicks. Turn the FT03 ON: single-click Next mode: single-click before the current mode ‘locks in’ (1.2 s) Previous mode: press&hold Last mode [100%]: from OFF: press&hold Turn the Lamp OFF: single-click button, after resting on a mode more than 1.2 s (mode locked in) Strobes: press&hold The strobes are deactivated by default. To enable strobes you must klick 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: from OFF: single-click followed by press&hold (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: from OFF: double-click followed by press&hold, same to re- enable the FT03 Factory reset: from OFF, single-click followed by a press&hold (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. | |
Advanced operationRefer to manual | |
| Switch Type: | Electronic (side) |
| Switch Location: | Side of the flashlight with LED indicator |
| Tail Stand: | Yes |
| Material: | Aluminum alloy with Type III hard-coat anodizing |
| Impact Resistant: | 1.5 Meter |
| Waterproof: | Equivalent to IPX7, do not immerse in liquids |
| Lens: | Glass with anti-reflective coating |
| High quality smooth reflector | |
| Color: | Black / Blue / Green |
| Weight: | 295g without battery |
| Size: | 69.5mm x 34.5mm x 170mm (Head diameter x Body diameter x Length) |
| Package Included: | 1 x Astrolux FT03 SFT40 2 x Spare Waterproof O-rings 1 x Lanyard 1 x User Manual |
User Interface:
- By default the FT03 is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a TURBO mode is also provided.
- A more conventional discrete level MODE-SET UI is available as an alternative. Any one of 12 pre- defined mode-sets can be selected.
- MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Package Included:
1 x Astrolux FT03
2 x Spare Waterproof O-rings
1 x Lanyard
1 x User Manual
