HAIKELITE H9 9*LH351D HCRI 10000lm 21700/ 26800 Flashlight

NOTE: Machine translated descriptions acquired from HAIKELITE (China) listing.

Quick start

• Stepless dimming: When starting up, press and hold the switch for stepless dimming to increase the brightness, release the switch and then press and hold to change the dimming direction and reduce the brightness Very bright: Quickly double-click in any mode to enter very bright, when the temperature of the torch reaches 550, There will be a temperature control protection function, the brightness will slowly drop to 2000 lumens, and it will continue to be on (about 90 minutes). When the temperature of the torch is lower than 480, it will rise to the high-brightness gear. Strobe: When it is turned on, double-click once to brighten again Double-click to enter strobe, double-click again to enter SOS mode, double-click again to enter tactical flashing, any gear click to turn off
• Battery power display: When the battery is lower than 3.2V, the blue light flashes, the red light flashes below 3V, and the battery will automatically shut down when it is lower than 2.8V
• Charging indicator function: the red light is on when charging, and the blue light is on when fully charged. Mobile phone charging indication: The blue light is always on when charging.
• Charging power: charging 5V 3A, 9V 2A, Huawei SCP5V 4. 5A, two-way fast charging.
• Stepless dimming/gear mode switching: When it is turned on, three clicks to switch between stepless dimming and gear mode Gear mode: first gear 100 lumens (74H), second gear 1000 lumens (3N), third gear 2000 Lumens (2H), fourth gear 4000 lumens (1. 5H), double-click to extremely bright 10000 lumens (temperature control downshift 1H)), double-click again to enter the strobe mode. Lock mode: Press and hold for three seconds to enter the lock function when it is turned off, and unlock it for three seconds when it is turned on.

Reminder for safe use:

• Please use a high-quality power battery (discharge capacity greater than 30A). The product is a high-resolution lamp bead, and the light is close to the sunlight, which can better restore the original appearance of the object. The flashlight battery is a parallel structure.
• Please try to keep the power of the battery and use the same batch of batteries. “When the battery voltage is too low, please charge it in time. The flashlight has a low battery reminder (when the voltage is lower than 2.8V, the flashlight will enter the protection function and turn off the flashlight). Do not point the mouth directly into the eyes of people or animals, and do not irradiate moving vehicles or flammable objects. It is normal for the head to heat up quickly, please use it with caution to avoid burning your hands.
• Unscrew the body of the flashlight and put in a 26800 battery. Note that the flashlight requires the use of flat or half-pointed batteries. Do not put the battery upside down when putting the battery in the mouth. The negative pole of the battery (full flat bottom) corresponds to the spring, and the positive pole of the battery (flat head direction) faces the front head. Screw the barrel tightly, the switch will flash when the flashlight is powered on. Tighten the cylinder body with appropriate strength, and be careful not to use too much force.
• The flashlight has a small standby current when it is turned off. The current is very small, don’t worry about it. However, it is recommended to remove the battery when not in use for a long time. (For example, it needs to be left for several months)
• Reminder for safe use of the company: The product is a high-power flashlight with strong light. When the battery is fully charged, it will be turned on for about 2 minutes to downshift. It is easy to exceed 55 degrees, in case of hot hands, warm reminder.