-25%
ASTROLUX® LT1 SST20 350lm RGB 14250 Lantern Flashlight
Original price was: $24.95.$17.46Current price is: $17.46.
LUMINTOP GTA OSRAM KW.CSLNM1.TG 550lm 585m AA/14500 Flashlight
Original price was: $35.95.$28.76Current price is: $28.76.
LUMINTOP GT94X 4*SBT90.2 24000lm 2950m 4*21700 Thrower Searchlight
Original price was: $640.00.$480.00Current price is: $480.00.
Emiiter: 4* Luminus SBT90.2 (Cool White)
Max. Brightness: 24000lm
Throw Distance: 2950m/ 1.83mi
Battery Type: 4*21700 (Button Top High Drain).
Description
Special Deal:
Price ($):
480
Coupon:
ND25F
Exclusive deal for 1theDeals.com. Sharing of our coupon code is strictly prohibited.
Specifications:
| Product name: | LUMINTOP GT94X 4*SBT90.2 24000lm 2950m 4*21700 Thrower Searchlight |
| Brand: | LUMINTOP |
| Model: | GT94X |
| LED type: | LUMINUS SBT90.2 (3V) |
| Color Temperature: | Cool White (CW): 6500K |
| Battery Configurations: | 4x 21700/ 8x 21700 with extension tube (sold separately) |
| Range: | 2950 m |
| Peak Beam Intensity: | >2175 kcd |
| Lumens: | Max. 24000 lm |
| Runtime: | – |
| Voltage Input: | 2.8V – 4.2V |
| Driver: | 12V, Texas Avenger V2 |
| Firmware: | Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace GT94X uses free software distributed under the terms of the GNU Public License version 3 GT94X Anduril code from toykeeper/flashlight-firmware |
| Mode(s): | Default UI: Smooth rampingThis feature-rich UI provides for smooth ramping of the light output between 0 and 50%, with an easily- accessible 100% TURBO mode. Turn the GT94X ON: single-click the button, GT94X turns ON using the previously used light output level Ramp light level: press&hold button Reverse ramp: while ramping in one direction, release button briefly and press&hold again Instant TURBO: double-click Turn the Lamp OFF: single-click MOON mode: from OFF: press the button and release as soon as the GT94X turns on Strobes: double-click for TURBO, and then double-click again The strobes are deactivated by default. To enable strobes you must click 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: triple-click (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: four clicks to disable the GT94X, same to re-enable the Lamp MOMENTARY mode: five clicks (loosen and re- tighten the tail-cap to return to normal operation) Factory reset: triple-click (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. |
Alternative UI: Mode-setsThe GT94X is factory-set to operate using the contemporary RAMPING user interface, as described in the previous section. However, the GT94X can also be operated using a more conventional MODE-SET style user interface. (See next section for detail on how to set UI options). Using the MODE-SET UI the output does not ramp, it steps from one mode to the next using single-clicks. Turn the GT94X ON: single-click Next mode: single-click before the current mode ‘locks in’ (1.2 s) Previous mode: press&hold Last mode [100%]: from OFF: press&hold Turn the Lamp OFF: single-click button, after resting on a mode more than 1.2 s (mode locked in) Strobes: press&hold The strobes are deactivated by default. To enable strobes you must click 3 times in setting #4 (ramping) or setting #8 (modes). (Use single-clicks to cycle forward through the different types of strobes, but you have to be quick: If resting on a strobe longer than 1.2 s it locks in and the next single- click is OFF. Press&hold at any time to cycle backwards through the strobes.) Battery status: from OFF: single-click followed by press&hold (4 blinks, a short pause, then 1 blink would indicate 4.1 V average per cell, for example) Electronic lock-out: from OFF: double-click followed by press&hold, same to re- enable the GT94X Factory reset: from OFF, single-click followed by a press&hold (battery status mode), then double-click (driver temperature mode), double-click again (firmware version mode), then press&hold for about 2 s. Four blinks confirm a successful reset. | |
| Switch Type: | Electronic (side) |
| Switch Location: | Side of the flashlight |
| Tail Stand: | Yes |
| Material: | Aluminum alloy with Type III hard-coat anodizing |
| Waterproof: | Equivalent to IP65, do not immerse in liquids |
| Lens: | Glass with anti-reflective coating |
| Reflector: | 118 mm inner diameter, aluminum, smooth finish |
| Color: | Black |
| Weight: | Approximately 2.5 kg without cells |
| Size: | 135mm x 239mm (Head diameter x Length) |
Package Included:
1x Lumintop GT94X flashlight
Images:
Additional information
| Sponsors & Partners |
Nealsgadgets ,Lumintop |
|---|---|
| Brand | |
| Material |
Aluminium |
| Color |
Black |
